Approve a faux fur cushion cover with the insert intended for the order. Start with the empty cover’s finished seam-to-seam dimensions and its usable opening. Then assess how the actual insert fills the corners, how the zipper closes and how much the seams pull. A nominal size describes the item only as precisely as the drawing and measurement method behind it.
Measure the cover on a flat table
Lay the empty cover flat without stretching the backing. Take the width and height from seam to seam and keep the loose pile out of the reading. Mark which edge is the top and which has the opening. For a rectangular lumbar cushion, write both dimensions in a consistent order and put the pile arrow on the drawing. Record the usable opening instead of measuring the entire zipper tape.
Compare inserts on the same sewn cover
When the desired fullness is undecided, compare a neutral fit and a fuller option using the same cover. Record both insert dimensions and the fill type. Fit each sample in the order a customer would and check how easily the corners can be seated. An insert that fills the face well but forces the zipper can be harder to remove and reinsert; a softer insert of the same nominal dimensions may sit differently. Use the approved silhouette and handling to decide whether the extra fullness is suitable.
| Observation | How to document it |
|---|---|
| Corner fill | Photograph the front and one side with the cushion in the same position. |
| Closure | Record usable opening length, how far the insert must be bent and any local pull at the zipper ends. |
| Seam and face | Inspect the corners for puckering, the backing for distortion and the pile for trapped fibers. |
| Pack and recovery | If packed compressed, open at the agreed time and repeat the fitted checks after the agreed rest. |
Agree what the customer or distributor will receive
Use separate order rows for cover only, insert only, and a filled or matched set where applicable. State whether a bundled insert goes inside the cover or is packed separately. If selling the cover only, approve the size text based on the insert fit you actually sampled, with enough information for the buyer to order a compatible insert.
Choose a construction in the faux fur cushion range or use the white faux fur cushion as a reference for your brief. Request a matched cover and insert sample with a drawing, intended fill, quantities and pack configuration.




