Cách đo kích thước chăn có trọng lượng để may vỏ bọc có thể tháo rời

For a removable weighted blanket cover, measure the insert laid flat, map the centre of every loop and check that the opening is large enough to insert and remove the blanket. The nominal size printed on a label does not tell you the finished dimensions, edge thickness or tie placement. Test a paired sample before ordering replacement covers in bulk.

Measure seam to seam and agree the orientation

Lay the insert on a flat surface with no pull at the corners. Measure finished length and width seam to seam, and note the edge thickness and binding. Pick an orientation, such as label at the bottom, and use the top-left corner in that orientation as the origin. If you only have a drawing, request a physical sample before final approval.

Map the loops so the cover can be cut and sewn to match

Draw the insert as a rectangle. Plot each loop from the chosen origin or mark its distance along a named edge from a defined corner. Label inside or outside placement and describe how the loop is oriented. Do the same on the proposed cover for the tie points. Confirm the two drawings represent the same dimensions and layout when the cover is fitted, rather than comparing a face-up drawing to its mirror.

Fit fieldCần ghi lại những gì
Insert bodyFlat width and length, edge thickness, label orientation.
Attachment pointsPoint ID, edge, position along the edge and loop description.
Cover openingUsable opening length, edge and distance from the corner.
Assembled sampleLoop reach, corner fit, closure movement and areas where the insert bunches.

Run a paired fitting check

Inspect the cover opening on the finished sample. Insert the actual blanket without pulling on the ends of the opening. Fasten the ties, close the cover and lay it flat. Check for extra fabric around the corners, gaps caused by misalignment and whether the zipper passes the insert clear of fabric. Remove it once to see whether it can be serviced easily. Approve the cover and insert as a pair by revision, and record separate care instructions for both.

Send the measurements with the order brief

Include the dimensioned drawing, target fabric, quantities by size and any label or pack instructions. The removable cover page is the place to identify the proposed cover; the weighted blanket range helps identify an insert. Consult the weighted blanket care guide before specifying cleaning for either part. Request a paired cover and insert sample and attach the point map.

Các câu hỏi thường gặp

Will the same size name fit blankets from different suppliers?

Size names do not establish seam-to-seam dimensions or loop placement. Check a specific insert and cover pair against your approved measurement sheet.

Is loop count enough for a compatible cover?

No. Record where each loop sits, its orientation and how it joins the proposed tie.

What should I check if a blanket is difficult to put into the cover?

Check usable opening length and edge, insert thickness, and whether the zipper or stitching is being forced. Recheck the paired prototype before approving either dimension.

Về Yixi Textile

Công ty Dệt may Chengdu Yixi cung cấp các sản phẩm dệt may gia dụng theo mô hình OEM/ODM cho các thương hiệu, nhà bán lẻ và khách hàng mua sỉ. Vui lòng liên hệ với đội ngũ bán hàng tại Thành Đô của chúng tôi để xác nhận địa điểm sản xuất cho đơn hàng của quý khách. Chúng tôi phục vụ các thương hiệu toàn cầu thông qua năm bộ phận: sản phẩm tạo cảm giác thoải mái có trọng lượng, bộ sưu tập lông thú nhân tạo, sức khỏe

Gối, đồ dùng giường ngủ và quà tặng từ tơ tằm dâu tằm. Các kỹ sư của chúng tôi, trang thiết bị hiện đại và quy trình kiểm tra AATCC/ISO nội bộ đảm bảo chất lượng đạt tiêu chuẩn thương hiệu. Hướng dẫn bởi “Trở thành sự lựa chọn hàng đầu của khách hàng,”

Nhận giải pháp tùy chỉnh

    Trước đó
    Compression Recovery Testing for Packable Travel Pillows
    Tiếp theo
    So sánh chỉ số độ phồng (Fill Power) và trọng lượng lông (Fill Weight) của chăn lông vũ

    Sản phẩm nổi bật

    Hãy liên hệ với đội ngũ bán hàng của chúng tôi.

    Chúng tôi sử dụng nguyên liệu thân thiện với môi trường để tạo ra một môi trường ngủ lành mạnh. Và chúng tôi luôn đặt chất lượng sản phẩm lên hàng đầu. Chúng tôi mong muốn hỗ trợ khách hàng trong việc lập kế hoạch sản phẩm và tiếp thị thông qua triết lý của mình. 

    • Quản lý sản xuất hiệu quả

    • Số lượng đặt hàng tối thiểu (MOQ) và thời gian giao hàng đã được xác nhận cho mã sản phẩm (SKU) mà quý khách đã chọn
    • Sản phẩm chất lượng cao

    • Đội ngũ nghiên cứu và phát triển chuyên nghiệp

    • Dịch vụ trực tuyến 24/7

    Nhận miễn phí catalog

      Gửi email cho chúng tôi

      info@yixitextile.com

      Liên hệ với chúng tôi

      Dù bạn đang lựa chọn sản phẩm từ danh mục của chúng tôi hay cần hỗ trợ kỹ thuật cho ứng dụng của mình, bạn có thể liên hệ với trung tâm dịch vụ khách hàng của chúng tôi để thảo luận về các yêu cầu về nguồn cung ứng của mình.

        viVietnamese